Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Pelham
Chimney liner replacement and partial rebuilds in Pelham typically run $2,800-$7,500 depending on flue count, chimney height, and whether the crown or smoke chamber needs work. Most Pelham jobs are completed in a single day, with our crews dispatching from the New York City office to reach village homes within the hour. Call (516) 927-2678 and a live person will pick up, any hour, to schedule your free estimate.
We’ve been working on Pelham chimneys for decades. The village’s tight grid of pre-WWII homes, especially the Colonials and Tudors clustered near the New Haven Line in Pelham Manor, presents a specific set of problems we see nowhere else in Westchester. Original coal-era flues converted to oil or gas. Clay tiles cracked by a century of freeze-thaw. Multi-flue chase chimneys serving both furnace and fireplace with no separation. Our Chimney Liner & Rebuild team documents every finding with camera footage you watch on screen, then delivers a plain-English verdict with no pressure to proceed. That’s the Hearthstone way.
Why Hearthstone Chimney Co. Is Pelham’s Preferred Chimney Liner & Rebuild Company
Pelham homeowners know the difference between a company that plans to be here in thirty years and one that might not answer the phone next season. We’ve served this region for over 42 years, and we intend to keep serving it. Our technicians are background-checked, uniformed, and trained to complete most liner and rebuild jobs in a single visit. The 90-Day Done Right Promise backs every job in writing: if it’s not right, we make it right, no paperwork, no arguing.
We know Pelham’s housing stock intimately. The late Victorian homes near Fifth Avenue, the Tudor Revivals along Edgewood Avenue, the brick Craftsman bungalows tucked behind the village center, these all share original masonry chimneys built for coal heat and modified, sometimes haphazardly, for modern appliances. A sweep who doesn’t understand that history might quote you a full rebuild when a stainless steel liner or crown repair is all you need. We run a Level-2 camera inspection first. You see what we see. Then we talk about what, if anything, requires fixing.
Calls come through to a live person 24 hours a day, 7 days a week. No voicemail. No callback queue. And our no-hassle upfront pricing means the number on your estimate is the number on your invoice.
Our Chimney Liner & Rebuild Services in Pelham
Stainless Steel Liner Installation
Pelham Manor’s multi-flue chase chimneys, common on the larger Colonial and Tudor estates, often have one flue serving a fireplace and another serving a furnace or boiler. When the original clay tiles are cracked or the flue was never properly lined after a coal-to-gas conversion, a DuraFlex stainless steel liner is the correct fix. We size the liner to the appliance, not the chimney, per NFPA 211. A typical stainless steel liner installation in Pelham runs $2,800-$4,200 for a single-flue system, including the camera inspection, photo report, and installation. Most are done in one day.
Flexible Liner Solutions
Some of Pelham’s older chimneys have offset flues or narrow passages that rigid stainless steel cannot navigate. For these, we use flexible liners from trusted manufacturers, sized and installed to match the appliance’s venting requirements. Flexible liners are particularly useful in the village’s tighter brick Craftsman bungalows where chimney geometry was never standardized. The cost range in Pelham is similar to rigid stainless: $2,600-$4,000 depending on length and diameter.
Liner Replacement
Existing liners fail. We’ve replaced corroded aluminum liners installed by previous owners, damaged flexible liners pulled by improper cleaning tools, and clay tile systems that have simply reached end of life. In Pelham, where salt-laden air off Pelham Bay accelerates deterioration, liner replacement is more common than in inland Westchester towns. We remove the failed liner, camera the flue to confirm the masonry condition, then install the correct replacement. Liner replacement in Pelham typically costs $2,400-$4,500.
Partial Rebuild
Not every spalled crown or eroded mortar joint demands a full teardown. Our partial rebuild service addresses the specific failed components: crown reconstruction with proper slope and overhang, mortar repointing with matching mix, smoke chamber parging with HeatShield. This is where Pelham’s coastal exposure matters most. The freeze-thaw cycles driven by nor’easters, combined with salt air, destroy crowns and joints on 80-100-year-old brick faster than almost anywhere in the county. A partial rebuild in Pelham runs $3,500-$6,500, versus $8,000-$15,000+ for full reconstruction. We only recommend partial rebuild when camera evidence confirms the flue itself is sound.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham
We stock and install professional-grade materials from manufacturers who back their products with real warranties: Gelco caps and accessories, Olympia Chimney liner systems, and Famco dampers and components. No builder-grade substitutes. For Pelham customers, this means faster turnaround, we don’t wait weeks for special orders, and every part meets the same standard we’d use on our own homes. Our Copperfield supply line covers specialty flashing and masonry repair materials for the detailed crown and joint work these older chimneys require.
Common Chimney Liner & Rebuild Problems We See in Pelham Homes
- Coal-era flues never relined for gas appliances. In Pelham Manor especially, we routinely scope heating flues still sized for the original coal boiler. The modern gas appliance vents into a clay-tile system too large to maintain proper draft, creating chronic weak draft and CO spillage risk. It’s a code violation and a safety issue, but it’s invisible without a camera.
- Cracked clay tiles misdiagnosed as “needs full rebuild.” A camera scope often reveals that cracked tiles are the only problem. A flexible or stainless steel liner resolves it at a fraction of rebuild cost. We show you the footage. You decide.
- Salt-air spalling and freeze-thaw crown damage. Pelham’s position at the southern tip of Westchester, exposed to Pelham Bay and Long Island Sound, accelerates mortar erosion and crown deterioration. This is environmental, not flue failure. Crown repair and repointing fix it; a liner won’t.
- Multi-flue cross-contamination on manor-side homes. The larger Pelham Manor estates often have chase chimneys with multiple flues. Without proper separation, furnace exhaust can migrate into the fireplace flue. Our camera inspection identifies this; liner installation with proper termination resolves it.
Pricing for Chimney Liner & Rebuild in Pelham, NY
| Service | Typical Range in Pelham |
|---|---|
| Stainless steel liner (single flue) | $2,800 - $4,200 |
| Flexible liner installation | $2,600 - $4,000 |
| Liner replacement (remove and reinstall) | $2,400 - $4,500 |
| Partial rebuild (crown, joints, smoke chamber) | $3,500 - $6,500 |
| Full chimney rebuild | $8,000 - $15,000+ |
| Level-2 camera inspection with photo report | $250 - $350 (credited toward repair) |
What moves the number? Flue height, number of flues, accessibility, and whether the crown or smoke chamber needs work. Two-story Pelham Manor Colonials with steep roof pitches cost more than single-story village bungalows. We price every job upfront after inspection, not before. The estimate is free. Call (516) 927-2678 for yours.
On a multi-flue chase chimney in Pelham Manor, our tech camera-scoped a clay-tile furnace flue sized for the original coal boiler and found it cracked and undersized for the modern gas appliance, with third-degree creosote glazing on the fireplace side. We documented everything on camera, then installed a DuraFlex stainless steel liner in the heating flue and HeatShield in the smoke chamber. The homeowner watched the entire scope on the monitor before authorizing a single repair. That’s how it should work. Photos you can see, a plain-English verdict. Done right, and we stand behind it.
We Also Serve Cities Near Pelham
Our crews work throughout southern Westchester. If you’re in Pelham or nearby New Rochelle, Bronxville, Larchmont, or Tuckahoe, the same live-answer phone line and same-day scheduling applies. Dispatch is coordinated from our New York City office, with local technicians serving each community.
Serving Pelham, NY - Our Local Coverage Area
We’re based in the Pelham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Pelham
Yes. A Level-2 camera inspection reveals the flue’s interior condition, liner presence, and sizing relative to the connected appliance. We scope both flues, show you the footage on our monitor, and measure the flue dimensions against the appliance’s venting requirements. In Pelham Manor, we find unlined coal-era flues on roughly half the pre-1950 homes we inspect. Call (516) 927-2678 to schedule your inspection; estimates are free.
Pelham sits directly adjacent to Pelham Bay and the Long Island Sound corridor, exposing your chimney to salt-laden air that accelerates mortar joint erosion and spalling. Combined with nor’easter freeze-thaw cycles driving water into porous 80-100-year-old mortar, crown and joint deterioration is nearly universal on first-time inspections here. New Rochelle’s postwar neighborhoods, built farther inland with newer materials, simply don’t face the same environmental stress. The fix is usually crown reconstruction and repointing, not necessarily liner replacement. We’ll show you which on camera.
We will not quote a liner or rebuild without camera evidence. Too many Pelham homeowners have been sold full rebuilds by contractors who never ran a scope. The “bad flue” is often just cracked tiles that a stainless steel liner resolves, or crown damage that partial rebuild addresses. We document everything on camera, explain what we found in plain English, and only then discuss options. No camera, no quote from Hearthstone. That’s our standard.
Yes. Chimney fires are not the only risk. In Pelham’s coal-conversion housing stock, the greater danger is often carbon monoxide spillage from an unlined or improperly sized heating flue. This produces no visible warning. NFPA 211 recommends annual Level-2 inspection for all chimneys, and Pelham’s pre-1950 homes with modified heating systems warrant particular attention. The $89 Seasonal Tune-Up includes camera inspection and photo documentation. Call (516) 927-2678 to book.
A partial rebuild addresses specific failed components: crown reconstruction, mortar repointing, smoke chamber parging. The flue itself remains intact, often with a new liner installed. A full rebuild dismantles and reconstructs the chimney structure from the roofline up, required when the masonry shell is structurally compromised or the flue is too damaged for liner installation. On Pelham’s pre-WWII homes, we find partial rebuild appropriate in roughly 70% of cases where other companies quoted full reconstruction. Camera inspection determines which applies to your chimney. Call (516) 927-2678 for a free evaluation.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Pelham and local communities for over 42 years.